ITSM -- INTERVAL TIMER  STOP- MOTION    
 ITSM -- This single frame advance camera motor control is commonly used in cell-animation, puppet-animation, time-lapse for slow motion (fast forward) effects. Also in nature documentary
films, glacier motion studies, environmental studies, construction sites and in the long exposure-
time photography. ITSM consists of more programmable and built in functions than competitive 
systems available at same affordable price range.

            ITSM/BXDC     
   Ready to operate a Bolex H16 Rex4 or later models.
   Power requirement: 12VDC battery or 110VAC line.
   Low price,  US$ 1340.00

  --  FEATURES:
* Exposure time control, range: from 1/6 sec. to 1.6 hour
  The default exposure time is 1/6 sec.
* Lapse time control, range: from 0.4 sec. to 1.6 hour
* Internal cloak day to day programming
* 6 digit up and down preset frame counter
* Preset start, stop and pause keys
* Total frame counter
* Camera forward and reverse
* Individual frame advance
* Shutter open / shutter closed
* Remote control switch for frame advance
* Advance time illuminating light output ON/OFF

 

Made to custom order.
 ITSM-Mit35DC  
This versatile stop-motion camera control is adaptable to control any camera suitable for a single frame operation and has 1-to-1 drive outlet. The camera drive motor and controls are available in custom made format for variety of cameras commonly used in trade such as:
Mitchell 16 & 35mm, Mauer, B&H, Acme, Kodak Cine Special, Kodak Reflex special, 
Requires 110VAC line.  Price US$1785.00

ITSM M35DC -- This DC High power stepping motor operated system is available  supply power from 110 VAC line or from  12  VDC battery.  

ITSM/BXAC -- This synchronized AC motor mounds readily to Bolex 
H16 Rex 4, Rex 5, SBM and EBM cameras.  Motor movements are controlled by ITSM control box including all above listed features. 
Power requirements: 110 VAC. 1 Amp.
ITSM and BXAC system works as a one unit and is not interchangeable with 
DC operated system.

ITSM / BXAC with 8ft.control cable and Remote switch.
US$ 995.00
ITSM/BXDC -- This DC stepping motor operated system offers versatility to supply power from 110 VAC line or from  12  VDC battery.  
Additional features: 
External capping shutter ON/Off control or Take-up 
motor advance. Note: ITSM and BXDC system works as a one unit and is not interchangeable with AC operated system.

ITSM and BXDC with 8ft.control cable, DC power supply cable, Capping shutter control cable and remote trigger switch.       
US$  1340.00

 

Stepping Motor and ITSM Controls for 16 and 35  Mitchell Camera. 
This system features all the same functions as BXDC. Power supply and motor 
drive is made to operate higher power motors.          US$ 1785.00  

ITSM / MIT35DC 
High power Stepping motor Control.

Power requirement: 110VAC  3 Amp.

Browse  JK Camera  products                  Animation equipment

Email:  jpkurhi@comcast.net